How to Install Picture Frame Molding in a Living Room: An Easy DIY

Learn how to install picture frame molding in a living room with this easy DIY tutorial. Get tips for measuring, spacing, cutting, installing, caulking, and painting wall molding.

One of the best ways to completely transform a room is with wall trim.

Picture frame molding is one of my personal favorites because it’s an easy way to add architectural character and make a living room look more expensive without a major renovation.

Plus it’s pretty simple to install with a few tips and tricks I can’t wait to share with you.

What Is Picture Frame Molding?

picture frame molding

Picture frame molding is also sometimes called box molding or panel molding.

Like the name suggests is molding that mimics picture frames on the wall.

The cuts are super simple because each corner is 45 degrees.

Picture frame molding can also be paired with chair rail for an elevated look.

How Much Does It Cost to Install Picture Frame Molding?

picture frame molding

Picture frame molding is one of my favorite ways to transform a room because it is much more cost effective than a major renovation and makes a big impact!

Plus DIY-ing picture frame molding is not a hard and scary process I promise.

The main piece of trim I use is base cap molding, at our local Lowes each 8′ piece is just under $12.

Other products you will need are caulk, nails, and paint.

For my living room, I added picture frame molding to two walls, one large, and one with a large window in the center.

The cost of picture frame molding for my project was $240. I also added chair rail around the room and that cost $32.

With the gallon of paint and a tube of caulk my total cost came out to about $362.

I did not include the cost of nails or tools because I already had those items. You will need to include them in your budget if you don’t already have those things.

Tools and Materials for Picture Frame Molding

Here is everything you will need to install DIY picture frame molding.

Tools

Materials

How to Measure for Picture Frame Molding

How to Measure for Picture Frame Molding

Before you start cutting any trim, take some time to plan your layout and figure out your picture frame molding measurements. This is probably the most important part of the project because a little extra planning now can save you from a lot of wasted trim and money later.

The good news? You don’t need complicated math to figure out your layout. Once you know how many boxes you want and how much space you want between them, you can calculate the size of each box pretty easily.

Decide How Many Picture Frame Boxes You Want

How to Measure for Picture Frame Molding

The first step is deciding how many picture frame boxes you want on each wall.

Start by measuring the total width of your wall. Then take a look at the wall and consider any features you need to work around, such as windows, doors, fireplaces, and even outlets.

For our living room, I wanted the molding to feel balanced without making the wall look too busy. I chose to use three picture frame boxes on the main wall, with the center box larger than the two boxes on either side.

When deciding how many boxes to use, don’t feel like every wall needs to have the exact same number. The goal is for the molding to look intentional and balanced with the layout of the room.

For a wide wall, you may want three or four boxes. A smaller wall may look better with one or two larger boxes. If you have a narrow wall between a window and a doorway, one large centered box might make more sense than trying to squeeze in multiple smaller boxes.

Tip: Before buying your trim, use painter’s tape to mock up your boxes directly on the wall. This is an easy way to see whether you like the proportions before making any cuts.

Determine the Height of Your Molding

How to Measure for Picture Frame Molding

Once you’ve decided on your layout, you’ll need to determine how tall your picture frame molding should be.

To do this I determined the height of the baseboards and crown molding then went from there.

For our living room, I measured the wall from the top of the chair rail to the ceiling and then worked within that space to create boxes that felt proportional to the room. I did the same for below the chair rail.

There isn’t one universal measurement that works for every room. The proportions of your wall are much more important than following an exact number.

For example, a room with 8-foot ceilings will require a different molding layout than a room with 10-foot ceilings. The size and placement of your windows and doors should also be considered.

How to Calculate the Width of Each Box

picture frame molding measurements

Now for the part that sounds more complicated than it actually is: figuring out how wide each picture frame box should be.

The easiest way to do this is to start with the total width of the wall and subtract all of the spaces you want to leave between and around your boxes.

Here’s the basic formula:

Total wall width − total spacing = total width available for your boxes

Then divide the remaining width by the number of boxes you want.

For example, let’s say you have a 120-inch-wide wall and you want three picture frame boxes.

If you want 6 inches of space between each box and 6 inches of space on both outside edges, you would have five 6-inch spaces:

6 + 6 + 6 + 6 + 6 = 30 inches of total spacing

Then:

120 − 30 = 90 inches

Now divide the remaining 90 inches by three boxes:

90 ÷ 3 = 30 inches

That would give you three boxes that are each 30 inches wide.

Of course, your boxes don’t have to be exactly the same width. In fact, you may want a larger center box with smaller boxes on either side, like I did in our living room.

In that case, you’ll want to calculate the total space available first and then decide how much larger you want the center box to be.

The most important thing is to keep the spacing consistent. Consistent spacing is what makes the finished molding look intentional and professionally installed.

How to Install Picture Frame Molding in a Living Room

Now that you have all your measurements complete it’s time to actually do the dang thing!

Step 1: Cut Spacer Blocks

How to Install Picture Frame Molding in a Living Room

Before I do any actual installing, I cut spacer pieces out of 2×4 boards. These spacer pieces make it easy and quick to find the spacing between the picture frame molding and the wall, baseboards, and crown molding.

For the living room I cut two sizes of spacer blocks, one at 3″ and another at 6″.

Each of my picture frame molding boxes will be 3″ from the baseboards, chair rail, and crown molding. Each box will also be 6″ from any wall corner, doorframe, and each other.

Step 2: Measure and Cut the Molding

How to Install Picture Frame Molding in a Living Room

Here is the biggest trick of this entire project, I don’t make any cuts with a miter saw… Instead I use these amazing miter shears.

These miter shears save me from having to make multiple trips outside to the garage and they are super simple to use.

Each cut will have a 45 degree mitered end, always remember the thickest part of the trim will be the longest side.

I start by cutting the horizontal pieces first, each piece should be the exact same length so I cut all four pieces before moving on to install.

Step 3: Attach the Picture Frame Molding

how to install wall molding

If you have a stud finder now would be a good time to mark all the stud locations on the wall.

Once that is done you can start installing your horizontal picture frame molding pieces.

I always start with the bottom piece, placing it on top of my 3″ spacer block and at the edge of my 6″ spacer block.

Next I use a level to make sure the trim piece is perfectly straight, then I use a brad nailer to attach it to the wall.

Try to hit as many studs as you can with the nails. For this small trim my nail size is 1-1/2″. Those might be a bit big but I have two boys so everything needs to be extra secure in this house.

Once the bottom horizontal trim piece is attached I move onto the top horizontal piece. Spacing it 6″ from the wall or door frame and 3″ from the bottom of the chair rail.

how to install wall molding

With the horizontal pieces installed it’s much easier to measure and cut the vertical side pieces.

The vertical side pieces are also cut with 45 degree miters at each end and installed the same way. If you have small gaps at the ends of the picture frame molding don’t worry, caulk will take care of those.

Step 4: Fill the Nail Holes

Once all your picture frame molding pieces are up, fill all the nail holes.

Don’t tell anyone but sometimes I just fill nail holes with caulk to save time.

If you fill them with wood filler though, you will need to sand those spots down with 220 grit sandpaper after.

Step 5: Caulk the Seams

This is where the project goes from looking DIY to looking professionally installed.

Caulk not only the corners where the trim pieces meet but also the seams on the inside and outside of the boxes.

This creates a professional, finished look that is 100% necessary!

Step 6: Prime and Paint

Paint for picture frame molding

Finally it’s time to prime and paint your picture frame molding!

Normally I like to paint all trim in a semi-gloss finish, it’s easiest for cleaning and dusting.

This time however I went with a more matte finish. I used Sherwin Williams Cashmere paint and color matched it to White Dove by Benjamin Moore.

This is the same color I used in the connecting hallway and entryway. It is the perfect non yellow white! I highly recommend it for rooms that don’t get a ton of natural light.

How to Install Picture Frame Molding Around Windows and Doors

How to Install Picture Frame Molding Around Windows and Doors

Just in case your room is anything like mine I wanted to address how I came up with the box sizes for the wall with the giant French door in the middle.

I knew I wanted each wall to have a picture frame molding box but I knew that identically sized boxes wouldn’t look quite right because the walls are different sizes.

So this is my cheat method for installing picture frame molding around windows and doors:

First I measure the width of the wall, then I take that number and subtract 12″. I subtract 12″ because I want the picture frame molding to be 6″ from every door, window, or wall corner.

How to Install Picture Frame Molding Around Windows and Doors

Then I cut all the horizontal pieces to that length and install them. Making sure to use my 3″ spacer block, set the trim 3″ above the baseboards and below/above the chair rail.

picture frame wall molding

The rest of the install goes exactly the same. This is just the easiest way for me to figure out what size each picture frame molding box needs to be and keeping everything looking cohesive.

Before and After: Our Living Room Picture Frame Molding

Living Room Makeover Before Photo

That’s a wrap on this portion of the living room makeover project!

This picture frame molding completely elevated the room without any major renovation.

picture frame molding living room

I completed this entire part in two days total and only had to make two trips to Lowes to do it (I needed one more piece of trim, of course).

picture frame molding living room

For $362 we were able to completely transform the look and feel of this space, not too shabby if you ask me.

This DIY is completely doable for everyone and I highly recommend giving picture frame molding a try.

How to Install Picture Frame Molding in a Living Room: An Easy DIY

Let me know what you think and if you have any questions!

You Might Also Like:

DIY Fireplace Mantel: How to Build a Beautiful Mantel Over Brick

Dining Room Board and Batten with Wallpaper

How to Install Board and Batten on the Stairs

How To Update Baseboards and Door Trim on a Budget

1

Tell me something!